A Series is a compact, light and powerful Class-D amplifier range delicated to install market. From two channel to 16 channel inputs, a part of the line can be equipped at request with AVS(Automatic Voltage Switcher),optimizing the energy consumption, as well as noise and distortion. The two and four channel models feature warning information and commands, like Failure Status, Amplifier Disable, Prior and Rest Alarm for easy reporting and counter measuring using the same technology, the four channel versions features additional presets, in order to offer Stereo and Sub working modes, including crossover frequencies adjustment.
Features:
- Low impedance load(2 Ω,4Ω,8Ω)output;
- Balanced XLR and 1/4”(6.3mm) TRS inputs,1/4”(6.3mm) TRS and output 2-speakon;
- Front panel LED indicators for signal/clip/protect;
- Stereo input or bridged mono operating modes.
Specifciations:
Power Specifications(tolerance +/-5%)
- Stereo mode (both channel drive): 2 x 100W(RMS) – 8Ω, 2 x 180W(RMS) – 4Ω, 2 x 400W(EIAJ) – 2Ω
- Bridge mono mode: 360W(RMS) – 8Ω, 800W(EIAJ) – 4Ω
Electrical Specification
- Input Sensitivity(limit OFF): 0.9-1.1V(+0/-1dBv)
- Input Impedance: 20KΩ balanced or 10KΩ unbalanced
- Frequency Response(At 10db Below Rated Output Power): 20Hz~20KHz(0+/-1db)
- Voltage Gain: 28+/-0.5db
- THD+N(Ref.1k 1/8 Rated Power, A-Weighted): <0.1%
- S/N rate(Ref. Rated Power, A-Weighted): >96db
- Crosstalk(Below Rated Power): >70db
- Damping factor(1k 8Ω): >180
- Power/Output Circuitry: Switching Power-CLASS D
General Specifications
- Protections: Full short circuit, open circuit, thermal, ultrasonic, and RF protection stable into reactive or mismatched loads, turn ON/OFF, muting, tried
- Controls: Front: ON/OFF Power Switch, Volume channel A,B, Rear:4-preset modes
- Indicators: SIGNAL:2 green LED, CLIP:2 red LED, POWER: 1 green LED, PROTECTION: 1 red LED
- Connectors: INPUT: Active balanced XLR or TRS JACK, OUTPUT: Speak-On
- Power Supply: AC:110-120V or 220-240V 50/60 Hz
- Dimensions: 483 x 360 x 44.0 mm
- Weight: 3.7KG