HIGH POWER CLASS-D AMPLIFIERS
As part of the AH Series, AH1000.2 and AH1500.2 offer both low impedance and high voltage outputs.
Featuring high power, those amplifiers can be used as powerful sources to drive large speaker systems in various
working modes.
Specification
Model | AH1500.2 |
Stereo Mode (All Channels Drive) |
2Ω: (EIAJ) 2800Wx2 4Ω:(RMS) 1500Wx2 / 8Ω:(RMS) 900Wx2 |
CHA/B (All Channels Drive) | 70V-1500W Load / 100V-1500W Load |
Bridge Mono Mode | 4Ω: (EIAJ) 1800W 8Ω: (RMS) 1000W |
Input Sensitivity (Limiter Off) | 0.9-1.1V(+0/-1dBv) |
Input Impedance | 20KΩ balanced or 10KΩ Unbalanced |
Voltage Gain | 38(+0/-0.5dB) |
Frequency Response (4Ω) | 20Hz~20KHz(0+/-1dB) |
THD+N | <0.1% (Ref. 1K 1/8 Rated Power, A-Weighted) |
S/N Ratio | >100dB |
Crosstalk | >70dB |
Damping Factor | >200 |
Protections | Full short circuit, open circuit, thermal, ultrasonic, and RF protection stable into reactive or mismatched loads, turn ON/OFF, muting, tried crowbar. |
Controls | Front: On/Off Power Switch, Volume channel A,B,Rear: Stereo-Parallel-Bridgt-70/100V-Mute Selector |
Indicators | Signal: 2 green LED / Clip: 2 red LED / Power: green LED / Protection: 1 red LED / Bridged: 1 red LED |
Connectors | Input: Neutrik combo XLR/TRS / Output: Speak-on jacks |
Power Supply | 220~240V 50/60 Hz |
Dimension (W x D x H) | 483 x 360 x 44 mm (19.02″ x 14.17″ x 1.73″) |
Weight | 6.1kg(13.45lbs) |