70V/100V 2CH HIGH VOLTAGE CLASS-D AMPLIFIERS
AH Series is the 70V and 100V version of the A series
By using high voltage outputs without transformers, amplifiers become lighter and very compact
For higher flexbility options like Dante Ultimo, DSP, AVS, and ErP are available at request(Only for AD/ADH Series).
- Amlifier disabled / Prior / Failure Status.
Specification
Model | AH500.2 |
CHA-B(ONE Channel Drive) | 70V (RMS) 480W x2 100V (RMS) 480W x2 |
CHA-B(All Channel Drive) | 70V (RMS) 400W x2 100V (RMS) 400W x2 |
Input Sensitivity(Limiter Off) | 0.9-1.1V (+0/-1dBv) |
Input Impedance | 20KΩ balanced or 10KΩ Unbalanced |
Frequrncy Respones | 100Hz~15KHz (0+/-3dB) |
Voltage Gain(100V) | 40(+0/-0.5dB); |
THD+N | <0.1% (Ref. 1K 1/8 Rated Power, A-Weighted) |
S/N Ratio | >95dB |
Crosstalk | >70dB |
Damping Factor | >200 |
Protections | Full short circuit, open circuit, thermal, ultrasonic, and RF protection stable into reactive or mismatched loads, turn ON/OFF, muting, tried crowbar. |
Controls | Front: On/Off Power Switch, Volume channel A,B Rear: 70/100V selector |
Indicators | signal:2 green LED / Clip: 2 red LED / Power: green LED / Protection: 2 red LED / Prior: green/red LED |
Connectors | Euroblock |
Power Supply | AC:110-120V or 220~240V 50/60 Hz |
Dimension(W x D x H) | 483 x 360 x 44mm (19.02″ x 14.17″ x 1.73″) |
Weight | 5.1kg(11.24lbs) |